Good morning, students.
Silakan mulai salin contoh teks prosedur dalam bahasa Inggris ini ke dalam buku masing-masing mulai dari teks di bawah ini:
---
How to Replace a Motorcycle Spark Plug
Materials Needed:
- New spark plug (specific to your motorcycle model)
- Spark plug socket and ratchet
- Spark plug gap tool
- Clean cloth
Steps:
Prepare the Motorcycle.
Park the motorcycle on a flat surface and turn off the engine. Let it cool completely to avoid burns, as spark plugs and surrounding areas can be hot.Locate the Spark Plug.
Find the spark plug, which is usually located on the cylinder head. Refer to your motorcycle’s manual if you are unsure.Remove the Spark Plug Cap.
Carefully pull off the spark plug cap to expose the spark plug. Be gentle to avoid damaging the spark plug wire.Remove the Old Spark Plug.
Use a spark plug socket and ratchet to loosen and remove the old spark plug. Turn it counterclockwise until it comes out.Check the Spark Plug Gap.
Take the new spark plug and use a gap tool to check and adjust the gap according to your motorcycle’s specifications. This is crucial for proper ignition.Install the New Spark Plug.
Insert the new spark plug carefully and hand-tighten it to avoid cross-threading. Then, use the spark plug socket and ratchet to tighten it further, but don’t over-tighten.Reattach the Spark Plug Cap.
Press the spark plug cap back onto the new spark plug until it fits snugly. Ensure it’s securely connected to avoid misfiring.Final Check.
Start the motorcycle to check if the new spark plug is working properly. If the engine runs smoothly, the replacement was successful.